客服
High speed dual head die bonder双头高速固晶机3D图纸
首页 >半导体设备图纸 >晶圆量测:量测-检测-光学 2026-11-19 报告错误错误问题可与客服联系,感谢您的支持![上传图纸即可免费下载]上传图纸后获得奖励和收益即可下载!0
0
4
图纸预览图
图纸预览图
图纸描述

详细3D图纸:stp格式!目前LED行业成熟设备!可以直接参考使用!因图纸特殊,右侧文件列表我已隐藏处理!

An LED Dual-Head Die Bonder is a high-speed, high-precision automated assembly system engineered for LED back-end packaging. It transfers LED chips (dies) from an expanded wafer ring onto substrates, leadframes, or PCBs using conductive or non-conductive epoxy/eutectic bonding.

1. Core Architecture & Working Principle

  • Dual-Bonding Head Configuration: Equipped with two independent, symmetrical pick-and-place bonding heads operating either in parallel or alternating modes. Each head features high-speed linear motor drives for X/Y motion and voice-coil motors (VCM) for closed-loop Z-axis bond force control.

  • Wafer Expansion & Ejector System: Dual wafer ring stages stretch blue dicing tape uniformly to separate individual dies. A precision needleless or multi-needle ejector pin lifts the target die from beneath while the collet picks it up cleanly without micro-cracking.

  • Epoxy Dispensing / Stamping Module: High-speed rotary stamping or jetting dispensers apply consistent, micro-volume silver epoxy or silicone paste onto substrate pads prior to die placement.

  • Machine Vision & Alignment: Dual high-resolution CCD cameras with coaxial/ring illumination perform real-time pattern recognition (PR) for wafer mapping, bad-die skipping, substrate fiducial alignment, and post-bond inspection.

  • Material Handling System: Integrated dual-lane or indexable leadframe/substrate loaders and unloaders ensure continuous feeding and minimal downtime.

2. Key Advantages

  • Ultra-High Throughput (UPH): By running two bonding heads simultaneously—and allowing one head to dispense or index while the other bonds—UPH is nearly doubled compared to single-head systems while reducing footprint per unit output.

  • Consistent Bond Line Thickness (BLT) & Tilt Control: Closed-loop force control and precision collet leveling ensure uniform die shear strength and minimal die tilt, which directly impacts LED luminous efficacy and thermal dissipation.

  • Multi-Bin & RGB Mixing Capability: Dual wafer tables allow simultaneous picking from two different wavelength/brightness bins or different color dies (e.g., Red + Green/Blue) in a single pass, ideal for Mini/Micro LED and RGB display packaging.

3. Typical Applications

  • Mini-LED & Micro-LED Backlighting / Direct-View Displays: High-density chip transfer onto glass or PCB backplanes.

  • SMD & COB LED Packaging: High-volume production of general lighting, automotive headlamps, and specialty UV/IR LED components.

  • RGB Full-Color Display Modules: Multi-die mixing and precision placement for fine-pitch LED screens.


下载需要1999金币 上传即可免费下载
图纸信息
图纸ID :827
文件大小:66.04K
所需金币:1999
图纸参数:可编辑,不包含特征参数
图纸格式:STEP
软件版本:2020
作者
用户XY0cKu
已分享: 543 份作品
作者头像
关注
文件列表
# 文件名称 大小
1 软件图标9 下载链接.ppt 92.5K